top of page
FLOOR CLEANING.png
Carpet on Wooden Floor
White Crosses

Why Choose Hunts Family Cleaning?

    Family Owned And Operated

​

  • First, we'll fully strip off all finish down to your VCT flooring

  • Next, the floors will be fully rinsed to remove all stripping solutions

  • Your floors will be allowed to dry. Applying finish to damp floors results in bubbling

  • 2-3 Coats of high-quality floor finish will be applied, with ample time in between for drying

  • The result: clean flooring with a beautiful sheen that you'll be proud to display!

Hunt's Family Cleaning Can Strip and Wax Any Floor Type!

we're skilled in caring for the following hard surface floors,

  • Linoleum

  • VCT Tiles

  • Marble and Granite

  • Natural Stone

  • Travertine

  • Wood

  • and more.

VCT Maintenance
There are a few things that you can do to help keep VCT protected. The first is to have a professional apply a premium floor finish. Since VCT is a porous material, without this protection the tile can become permanently discolored due to ground-in dirt.

Once the finish has been applied you will want to have some long entry mats in your facility, both by outside doors and inside any warehouse doors you may have. 75% of dirt comes off in the first 30 feet of flooring!

Next, plan on dust mopping at least once a day to help prevent dirt from embedding into the floor finish. And last but not least, you should mop once a day if at all possible or at least every other day. Make sure when mopping to change the water frequently so dirty water doesn’t get back onto the floor. A floor buffing schedule can and will also keep your floor looking great all year long. Call us today for all you VCT floor cleaning needs!

Marble Floor
Floor Cleaner
VCT Floor Care

  • High-quality floor care with a plan designed for your unique business! We provide multiple ways to clean and maintain your floors:

  • Stripping & Waxing: A strip and wax is necessary when the old floor finish has either been wore down from insufficient top scrubs or from too much dirt becoming embedded in the finish from improper floor maintenance. This consists of using a stripper solution to emulsify the old finish from the tile, a powered low rpm buffer or a propane stripper to help remove the finish, neutralizing the floor with cold water to seal the pores. The final step is to lay down at least 4 coats of premium floor finish.

  • Top Scrub: A top scrub should be performed at least once a quarter, depending on the foot traffic at your facility. This process uses a light cleaner with a special pad to remove the top layer of dirt from the floor finish. Clean water is mopped on to close the pores of the tile and then new premium floor finish is applied. The great thing about utilizing the top scrub process is you constantly have a new looking floor year round. At least four coats of finish are normally applied, so if the dirt is trapped in the first two layers that are removed… the bottom two layers never have to be stripped. This is a cost saving for you!

SEE OUR BEAUTIFUL WORK

bottom of page